Dairy Cylinders

Typical sizing for dairy cylinders are from 180 litres to 1500 litres.

Note: When ordering Dairy cylinders please specify layout LH or RH.

Stainless Inner Barrel and Polished Stainless Steel Outer Case

Code Litres Diameter Height kW
D350710SS 350 710 1670 2 x 3
D400710SS 400 710 1860 2 x 3
D450710SS 450 710 2010 2 x 3
D450810SS 450 810 1690 2 x 3
D500810SS 500 810 1830 2 x 3
D600810SS 600 810 2100 3 x 3
D700810SS 700 810 2370 3 x 3
D700915SS 700 915 1870 3 x 3
D800915SS 800 915 2080 3 x 3

Other sizes available on request.

 

Copper Inner Barrel and Galvanised Steel or Polished Stainless Steel Outer Case

Galv Casing SS Casing Litres Diameter Height kW
DC180610 DSS180610 180 610 1350 1 x 3
DC200610 DSS200610 200 610 1350 1 x 3
DC225610 DSS225610 225 610 1560 1 x 3
DC270610 DSS270610 270 610 1790 1 x 3
DC270710 DSS270710 270 710 1400 1 x 3
DC270810 DSS270810 270 810 1050 1 x 3
DC300710 DSS300710 300 710 1400 1 x 3
DC300810 DSS300810 300 810 1300 1 x 3
DC350610 DSS350610 350 610 2190 2 x 3
DC350710 DSS350710 350 710 1660 2 x 3
DC350810 DSS350810 350 810 1400 2 x 3
DC400710 DSS400710 400 710 1820 2 x 3
DC450710 DSS450710 450 710 2090 2 x 3
DC450810 DSS450810 450 810 1600 2 x 3
DC450915 DSS450915 450 915 1300 2 x 3
DC500710 DSS500710 500 710 2200 2 x 3
DC500810 DSS500810 500 810 1710 2 x 3
DC500915 DSS500915 500 915 1400 2 x 3
DC600810 DSS600810 600 810 1900 3 x 3
DC600915 DSS600915 600 915 1550 3 x 3
DC700810 DSS700810 700 810 2200 3 x 3
DC700915 DSS700915 700 915 1740 3 x 3
DC800915 DSS800915 800 915 2050 3 x 3
DC8001160 DSS8001160 800 1160 1400 3 x 3
DC1000915 DSS1000915 1000 915 2300 3 x 3
DC10001160 DSS10001160 1000 1160 1650 3 x 3
DC1200915 DSS1200915 1200 915 2800 3 x 5
DC12001160 DSS12001160 1200 1160 1900 3 x 5
DC15001160 DSS15001160 1500 1160 2270 3 x 5

Other sizes available on request.

 

Stainless Inner Barrel and Blue Plastic Outer Case

Code Litres Diameter Height kW
DSSP600 600 900 1650 3 x 3
DSSP800 800 1170 1380 3 x 3
DSSP1000 1000 1170 1640 3 x 5
DSSP1200 1200 1170 1865 3 x 5
DSSP1500 1500 1170 2180 3 x 5

 

Warranty – 3 years

Superheat dairy hot water cylinders must be installed by qualified installers in accordance with all relevant Building Codes (G12) and NZ standards (NZS 4605 Code of practice for The Installation of Dairy-type Thermal Storage Electric Water Heaters).

The Superheat dairy hot water cylinder is guaranteed against faulty manufacture for a period of three years.  This warranty applies only to defects occurring under conditions of normal use for the purpose that the water cylinder was manufactured.  This includes a one year parts and labour warranty for a failed component or if necessary full replacement of the dairy hot water cylinder. For years two and three the manufacturer has the option to repair or replace a faulty dairy hot water cylinder.

The warranty does not cover corrosion due to poor quality water, overpressure or negative pressure, incorrect installation, misuse, Acts of God, repair works or modifications not authorised by the manufacturer.

The elements and thermostats fitted into this cylinder are independently guaranteed by their respective manufacturers for a period of one year from the date of purchase.  The manufacturer will supply replacement components but accept no responsibility for any costs involved in the replacement of these components due to failure.

We recommend that water tests are carried out in areas where the water has low pH or high nitrate levels which can corrode copper cylinders, and areas where the water has low pH and high chlorides which can corrode stainless steel cylinders.