|
All cylinders are prewired and include element and consumer adjustable thermostat
Low pressure cylinders have a long life copper barrel and operate at up to 75kPa (7.6metre) head.
Medium pressure cylinders have a long life copper barrel and operate at up to 120kPa (12 metre) head for greater water pressure and improved shower flow.
Mains pressure cylinders have a duplex stainless steel barrel and operate at up to 500kPa (50 metre) head. They include a TPR valve rated to 850kPa
The direct wetback option can be fitted to all low pressure cylinders (except undersink units) installed open vented. This provides water heating from appropriately setup solid fuel burners. Wetback fittings can have a left, right or bottom orientation.
Mains and Medium pressure wetback cylinders have a heating coil which transfers heat from an appropriately setup wetback system to the cylinder. This gives the advantages of higher water pressure together with the energy savings from the wetback system.
Solar hot water cylinders are supplied to manufacturers and installers of solar hot water systems with direct and indirect (coil) options. Soler connections or coils can be fitted to all domestic cylinders (except undersink units).
Special systems can be made to order, including combined wetback & solar, additional fittings and coils etc. Please contact us if you require assistance specifying a cylinder to suit your plumbing and heating requirements.
Quick recovery element option is an additional element installed in the cylinder to provide extra heating during periods of heavy demand. The quick recovery element is generally installed higher in the cylinder (eg top 1/3) and normally requires a seperate electrical connection.
>Contact us if you have any queries.
> Available sizes
|
